Penebar - waterproofing of working joints and the communication inlet

Penebar - harness for waterproofing technological (working) joints in concrete construction and commissioning of communications. Harness for waterproofing horizontal and vertical seams work with technological discontinuous pouring of concrete structures, commissioning of engineering services, drilling, in both existing and newly built concrete structures. Features: provides water-resistant seams, joints, abutting joints in concrete structures due to its high resistance to hydrostatic pressure and the ability to expand up to 300% within a limited space. Advantages: properties waterproofing strip, Penebar not change throughout the entire lifespan that is not limited in time. Installation is simple, without special tools, quickly, in any weather and season. The technology of application: for waterproofing of the working seam technology intermittent pouring, remove the paper from the harness, put "Penebar" adhesive side firmly on the concrete surface at least 50 mm to the edge of the structure, the wiring between splice cut at an angle of 45 degrees to create a continuous layer, then fix the mounting offsets from the grid and plug of 40-50 mm and 250-300 mm. Convenient to mount hydroproline before installing the formwork. Allowed harness laying on damp concrete surfaces, but standing water before beginning work to remove. Putting communications at the stage of construction: all pipe liner passing through a concrete structure, it is necessary to tightly wrap the harness "Penebar" sticky side to the surface of communication elements, which should be clean and dry. Distance to edge concrete structures shall be not less than 50 mm. Repair of waterproofing of communication inlet: round tubes in the concrete structure to make the toothing, to lay the wiring, Penebar, then prepare the mixture "Penekrit", firmly put to the edge of the concrete surface, to cover the material "Penetron" in two layers.