Superplasticizer SP-1 (similar to p-3)

Superplasticizer SP-1 (similar to p-3)

original price: 120,00 RUB
Simferopol', Russia
Simferopol', Russia
Anonymous
+7 978 87 000 56
Ирина
Contact person

Basic Information

Additive "Polyplast SP-1" is a mixture of sodium salts polietilentereftalat of different molecular weight. Supplement is available in two types: with not normalized by the entrainment and adding vastupidavusega component – reduced (normalized) with air entrainment (type VP). Additive "Polyplast SP-1" can be used in the manufacture monolithic and prefabricated reinforced concrete products and constructions of heavy, light and cellular concrete in the construction for different purposes: civil, industrial, transport, road, etc., including in the manufacture of products and designs of water supply systems. Additive "Polyplast SP 1" recommended for use in the manufacture of: • conventional concrete and prestressed structures from heavy concrete class B15-C40 and high-strength heavy concrete classes В45 and above; • structures made of lightweight concrete with porous aggregates classes 7.5 and higher; • the structures of fine-grained concrete class B10 and above; • if you want to use non-standard aggregates (fine Sands etc.); and also: • in the construction of monolithic structures using strain cement; • in the manufacture of monolithic and prefabricated structures of heat-resistant concrete for Portland cement, slag cement and alumina cement; • high-strength concrete produced from high-mobility and cast mixtures. The use of the additive "Polyplast SP-1" allows to achieve the following indicators: • to increase the mobility of the concrete mix from P1 to P5 without reducing the strength concrete; • to reduce the quantity of mixing water of 21% or more (in ravnopraviya mixtures); • to increase the ultimate strength characteristics of concrete by 20% or more (in ravnopraviya mixtures); • to reduce cement consumption by up to 22 % (in ravnopraviya mixtures) compared with the clear composition; • 1.5 – 1.6 fold increase in adhesion of the concrete with a bond fittings and the hardware; • to obtain concretes with high water resistance, frost resistance (in ravnopraviya mixtures); • to reduce time and energy costs for heat and humidity treatment concrete; • significantly reduce the time and energy cost of the vibrating the concrete mix, and in some cases completely abandon it; • increase the turnover of forms.

Delivery terms and packaging

Unfortunately the seller did not specify the terms of delivery. For more information, contact the seller.
Фотографии

    Password recovery
    To recover your password, please enter in the box below your email address with which you have registered:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    An error has occurred. Please check your e-mail address and try again.
    Ваш новый пароль:

    Name is empty


    Выберите страну доставки

    You have not written a message

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    Your message has been sent!

    Close

    1

    Дата события:

    12.10.2016 - 18.10.2016
    Catalog
    Cancel Close
      Show more close
        Area search
        Worldwide
        Категории
          Product