Waterplug - stop pressure leaks water

Waterplug – gidroplomba. Material to stop and eliminate the pressure the water leakage in concrete structures. Feature: unique short setting time ( 3 min.), the ability to expand. The cooking part: mix the dry ingredients "Waterplug" with water in the proportion of 150 g of water per 1 kg of material or 1 part water to 5 parts of the material. The premixed dry land. Depending on the activity and si crystals leaking water ratio can vary, for example, if the flow is strong, then the number is added to the mix water should be reduced to the following proportions: 1 part water to 6 parts "Waterplace". It is necessary to prepare this amount of mixture that can be used for 2 minutes as the solution was quickly grasped. Application: cavity pressure leak to disclose at a minimum width of 25 mm and a depth of not less than 50 mm, and the deeper into the concrete, the wider (in the form of a "dovetail"), remove loose concrete. After preparation of the cavity with a solution of a material "Waterplug" with a maximum effort press in the place of the leak. Upon elimination of pressure leaks through long vertical cracks should start from the highest point. The setting time of the material depends on the temperature of the concrete structure and the pressure force of water, 2 to 3 minutes. The lower the temperature of water and concrete, the slower the process of setting material. Technique of performance: fill material "Waterplug" only half of the cavity of the leak, if possible the excess is immediately removed. After blocking of the leak must be processed gidroplomba material "Penetron". Then the remaining volume of the cavity filled with a solution of the material "Penekrit", and then renovated the cavity and adjacent the surface treating material "Penetron" in two layers. Consumption "Waterplug" - 1,9 kg/DM. KUB